EFFE ESSE INTERNATIONAL
COMPANY
CATALOG
CONTACT US
INQUIRIES
HOME


EFFE ESSE INTERNATIONAL
Via San Donato,5
Cittadella (PD),
 35013,
Italy
Tel: 0039-049-9402112
Fax: 0039-049-9400410

Powered by Catalyst Suite - Select here to find out more
COMPANY
TUBE & WIRE WORKING MACHINES

Our Company, products and services
Our Company, products and servicesSince 1973 the company EFFE ESSE INTERNATIONAL (old name's COMECEL) has been engineering and manufacturing tube & wire working machines. Specializing in tube & wire grinding - polishing - cutting - cutting & champfering. This machines can process every type of tubes : alluminium, copper, steel, stainless steel or any other alloys.

The range of working tube machines
-cutting from 2 (.080)up 230 mm.(9)
-cutting & champering from 8 up 230 mm.
thickness wall from 0,3(.012) up 35 mm.(1 3/8)
-grinding/polishing from 3 up 145 mm.

CUTTING
Effe Esse International cutting lines equipped with discs or tools , are preferred for their very low noise level, fast performances, versatility, quality of finish, and very close dimentional tolerances.
The tube is feed through the cutting line automatically by means of bundle loader.
Every machine is equipped with standard crop cutting device and can automatically separate the scrap from the good pieces.

CUTTING WITH DISCS
In this system two discs are used , or four discs only in particular cases. This type of cutting does not produce cutting chips, and so we have the advantage of working without required coolant. Consequently the final part is clear and without shavings. Every discs can produce a great quantity of cuts, and can be resharpened for many times over. The same disc can be used for the complete machine size range.

CUTTING WITH TOOLS.
Two or four rotary parting tools are used and the cutting chips are casely removed. The cutting surfaces are straight and perpendicular to the tube work axis. We can make, with the same cutting cycle time, other additional operations on the tube-ends : we can make the external champfering and the internal edge cutting, on one or both ends of the tube. In this way we can obtain a finish product without increasing the cycle time, avoiding further off-line operations.

CNC - CUTTING AND CHAMPFERING LINES
If you want tube finish , use this machine :
-Cutting with discs or with tools
-cn control on loading
-cn control on rotary head speed
-cn control on tooling speed
-Champfering in the same cutt-off time with champfering units
-cn control on champfering tooling positioning
-cn control on tube cutting lenght
-Mechanical tube inside cleaning station
-Tube Washing station
-Lenght control
-Inside diameter control
-Markt station (if you want sign the tube with your code production)
-Automatic Packaging system
-cnc control

TUBE & WIRE GRINDING & POLISHING LINES
The polishing system line is designed to process both round and elliptical or square tube. The polishing heads are fitted with belt-opening - closing devices wich allow the working pressure of the belts to be adjusted. In addition the surface polishing can be interrupted even with tube in the machine. Automated processing is posible by fitting a tube loader and unloader. The number of polishing heads specified depends on the quality of sirface finish required. The machine can also be used :
-in - line, without loading and unloading equipment, to polish tube coming from a forming machine;
-in - line , to polish wire, with coils loading equipment;

more informations ? :

http://www.comecel.com
e-mail : fsi@comecel.com
phone 0039 049 9402112
telefax 0039 049 9400410

Next: Automatic Wire Grinding line



[HOME]  [CATALOG]   [COMPANY]   [INQUIRIES]  [CONTACT US]